CCNP ENCOR Readiness Test

10 questions, balanced across the exam's topics. Answer each one, then submit for your practice readiness estimate and per-topic breakdown. This is a practice estimate — not a prediction or guarantee of your official exam result.

Question 1

How does a lightweight AP typically discover its WLC on first boot in an enterprise network?

Through CDP from the switch DHCP option 43, DNS resolution, or broadcast, in priority order Via BGP advertisements Only via a statically configured IP

Question 2

Which statement about the MST boundary port is true?

It connects to a non-MST switch and runs as an RSTP port toward the outside It disables STP on the link It carries only instance 0 traffic It cannot be a trunk

Question 3

What is Cisco DNA Center's role at a community bank?

A replacement for routers A syslog server only A firewall appliance A controller providing intent-based automation, provisioning, and assurance

Question 4

What is a TLOC in SD-WAN?

A route target Transport Locator identifying a WAN interface with system IP, color, and encapsulation A type of VPN tunnel A controller

Question 5

What does an SNMP view control?

The SNMP version The polling interval The trap destination Which MIB subtrees a group or community can access

Question 6

Which command enables BFD for OSPF on an interface with aggressive 300ms timers?

ospf bfd enable timers 300 ip ospf bfd plus bfd interval 300 min_rx 300 multiplier 3 ip ospf dead-interval 1 bfd neighbor 10.0.0.2

Question 7

What does the LISP canonical address format separate with its two namespaces?

IPv4 from IPv6 Endpoint identity (EID) from routing location (RLOC) Source from destination ports Public from private addresses

Question 8

Which UDP ports does RADIUS use for authentication and accounting?

443 for both 1812 for authentication, 1813 for accounting 49 for both 1813 for authentication, 1812 for accounting

Question 9

Which statement about WLC interfaces is true?

AP-manager interfaces are required with LAG All interfaces carry client data The management interface handles AP management traffic; dynamic interfaces map to client VLANs The virtual interface routes traffic

Question 10

Which statement about 802.1Q tunneling (Q-in-Q) is true?

The provider edge adds a second 802.1Q tag so customer VLANs are preserved across the provider network It limits the customer to 16 VLANs It requires the customer to use ISL It removes the customer tag at ingress

Unanswered questions count as incorrect. Your answers are graded on the server; no answer key is sent to your browser.

← Back to the CCNP ENCOR page

About Contact Privacy Policy Terms of Service Refund Policy

Home Exams Simulations WorkTrials GameScope Account